GATE Engineering Materials: Engineering and true stress-strain diagrams – Previous Year Questions
6 GATE previous year questions on Engineering and true stress-strain diagrams (Engineering Materials, Mechanical Engineering) with answers and explanations, from every paper.
6 questions worth 8 marks in all (4 1-mark, 2 2-mark). Asked between 2016 and 2023, so you can see how the topic has been tested over time.
- GATE 2016 ME (ME3) Q30 – Engineering strain of a mild steel sample is recorded as 0.100%. The true strain is
- GATE 2018 ME (ME1) Q21 – Beyond initial yield in a linearly hardening plastic material, true stress .
- GATE 2018 ME (ME1) Q58 – The true stress–true strain curve shown loads a strain-hardening material to A at 500 MPa and strain 0.5, then unloads to B at 100 MPa. With E = 200…
- GATE 2019 ME (ME1) Q35 – The stress–strain curve of an ideal elastic–plastic strain-hardening metal is shown. It was loaded from O through initial yield P to Q, unloaded to…
- GATE 2022 ME (ME2) Q16 – Which one of the following is the definition of ultimate tensile strength (UTS) obtained from a stress-strain test on a metal specimen?
- GATE 2023 ME Q57 – Ignoring the small elastic region, the true stress () – true strain () variation of a material beyond yielding follows the equation = 4000.3 MPa. The…