GATE Machining and Machine Tool Operations: Mechanics of machining – Previous Year Questions
18 GATE previous year questions on Mechanics of machining (Machining and Machine Tool Operations, Mechanical Engineering) with answers and explanations, from every paper.
18 questions worth 34 marks in all (2 1-mark, 16 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2017 ME (ME1) Q34 – A metric thread of pitch 0.8 mm is cut on a lathe whose lead screw has 1.5 mm pitch. If spindle speed is 1500 rpm, find lead-screw speed in rpm.
- GATE 2016 ME (ME3) Q59 – For an orthogonal cutting operation, tool material is HSS, rake angle is 22°, chip thickness is 0.8 mm, speed is 48 m/min and feed is 0.4 mm/rev. The…
- GATE 2016 ME (ME1) Q34 – In an orthogonal cutting process the tool used has rake angle of zero degree. The measured cutting force and thrust force are 500 N and 250 N,…
- GATE 2017 ME (ME2) Q64 – Turning a 20 mm steel bar at 400 rpm gives 20 min tool life; at 200 rpm it gives 60 min. Assuming Taylor’s tool-life equation, life at 300 rpm is…
- GATE 2018 ME (ME2) Q58 – In orthogonal turning of a 100 mm diameter rod, rake angle is +15°, uncut chip thickness 0.5 mm and nominal chip thickness after cutting 1.25 mm. Find…
- GATE 2018 ME (ME1) Q59 – In orthogonal cutting, uncut thickness is 0.010 mm, cutting speed 130 m/min, rake angle 15° and width 6 mm. Chip thickness is 0.015 mm, cutting force…
- GATE 2019 ME (ME2) Q64 – Orthogonal cutting with a single-point tool of rake 10° produces uncut and chip thicknesses 0.125 and 0.22 mm. By Merchant’s first solution for…
- GATE 2019 ME (ME1) Q45 – In orthogonal turning of a cylindrical tube of wall thickness 5 mm, axial and tangential cutting forces are 1259 N and 1601 N. Measured chip thickness…
- GATE 2020 ME (ME2) Q53 – A 200 mm diameter cylindrical bar is turned using ASA tool geometry 0°–9°–7°–8°–15°–30°–0.05 inch, giving cutting force F c1. Geometry changes to…
- GATE 2020 ME (ME1) Q55 – In orthogonal turning, a 100 mm long chip is obtained from an uncut chip length of 250 mm. Cutting speed is 30 m/min and rake angle 20°. Find…
- GATE 2021 ME (ME2) Q50 – In a pure orthogonal turning by a zero rake angle single point carbide cutting tool, the shear force has been computed to be 400 N. The cutting…
- GATE 2021 ME (ME1) Q48 – An orthogonal cutting operation is performed using a single point cutting tool with a rake angle of 12° on a lathe. During turning, the cutting force…
- GATE 2022 ME (ME2) Q54 – A straight-teeth horizontal slab milling cutter is shown in the figure. It has 4 teeth and diameter (D) of 200 mm. The rotational speed of the cutter…
- GATE 2022 ME (ME2) Q55 – In an orthogonal machining operation, the cutting and thrust forces are equal in magnitude. The uncut chip thickness is 0.5 mm and the shear angle is…
- GATE 2022 ME (ME1) Q54 – Under orthogonal cutting condition, a turning operation is carried out on a metallic workpiece at a cutting speed of 4 m/s. The orthogonal rake angle…
- GATE 2022 ME (ME1) Q55 – A 1 mm thick cylindrical tube, 100 mm in diameter, is orthogonally turned such that the entire wall thickness of the tube is cut in a single pass. The…
- GATE 2023 ME Q44 – In an ideal orthogonal cutting experiment (see figure), the cutting speed V is 1 m/s, the rake angle of the tool = 5°, and the shear angle, , is known…
- GATE 2026 ME Q63 – During orthogonal turning by using a single point cutting tool, feed rate is 0.24 mm/rev. The uncut chip thickness is 0.23 mm. The shear angle,…