GATE Metrology and Inspection: Limits, fits and tolerances – Previous Year Questions
6 GATE previous year questions on Limits, fits and tolerances (Metrology and Inspection, Mechanical Engineering) with answers and explanations, from every paper.
6 questions worth 8 marks in all (4 1-mark, 2 2-mark). Asked between 2019 and 2025, so you can see how the topic has been tested over time.
- GATE 2019 ME (ME1) Q46 – A turned shaft diameter is 65.00+0.01 -0.05 mm. It receives 50 μm TiN coating with allowed variation ±5 μm. Find minimum hole diameter (mm) just…
- GATE 2020 ME (ME1) Q53 – For a basic-shaft system: hole tolerance = 0.002 mm, shaft tolerance = 0.001 mm, allowance = 0.003 mm and basic size = 50 mm. Find maximum hole size…
- GATE 2021 ME (ME2) Q19 – The allowance provided in between a hole and a shaft is calculated from the difference between
- GATE 2022 ME (ME2) Q20 – A shaft of diameter 25-0.04 -0.07 mm is assembled in a hole of diameter 25+0.02 -0.00 mm. Match the allowance and limit parameter in Column I with its…
- GATE 2022 ME (ME1) Q20 – The type of fit between a mating shaft of diameter 25.0+0.010 -0.010 mm and a hole of diameter 25.015+0.015 -0.015 mm is .
- GATE 2025 ME Q25 – When assembled, the hole 30+0.030 +0.000 mm and shaft 30+0.020 -0.020 mm will result in