GATE Fluid Mechanics: Properties of fluids, fluid statics – Previous Year Questions
16 GATE previous year questions on Properties of fluids, fluid statics (Fluid Mechanics, Civil Engineering) with answers and explanations, from every paper.
16 questions worth 24 marks in all (8 1-mark, 8 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 CE (CE2) Q26 – Match fluid types P Newtonian, Q pseudoplastic, R plastic, S dilatant with curves 1–5 in the shear-stress versus shear-rate diagram.
- GATE 2016 CE (CE1) Q58 – A sector gate is provided on a spillway as shown in the figure. Assuming g = 10 m/s2, the resultant force per meter length (expressed in kN/m) on the…
- GATE 2017 CE (CE2) Q55 – An open U-tube of uniform square cross section 5 mm × 5 mm initially has mercury (specific gravity 13.6) standing 20 cm high in each vertical limb.…
- GATE 2018 CE (CE2) Q56 – The three immiscible fluids shown are connected to a vacuum pump. Fluid specific gravities are S1 = 0.88 and S2 = 0.95; fluid III is water. Water unit…
- GATE 2018 CE (CE1) Q42 – A closed tank has bottom mercury layer 0.5 m thick (SG 13.6), water layer 2.0 m thick above it, and oil layer 3.0 m thick (SG 0.6) above the water.…
- GATE 2019 CE (CE2) Q22 – A solid sphere of radius r and material density s moves through an atmosphere of constant pressure p with velocity v. Find the net force due ONLY to…
- GATE 2020 CE (CE1) Q23 – A body floating in liquid is in stable equilibrium when its .
- GATE 2021 CE (CE2) Q33 – A lake is 60 m deep. Atmospheric pressure is 91 kPa and water unit weight 9790 N/m³. Find absolute pressure at maximum depth in kPa to two decimals.
- GATE 2021 CE (CE1) Q20 – Kinematic viscosity is dimensionally represented as
- GATE 2021 CE (CE1) Q59 – A horizontal cylinder has diameter 2 m, length 3 m and weight 25 kN. Water on its left reaches 1 m above its top; oil of specific gravity 0.8 on its…
- GATE 2022 CE (CE2) Q21 – The dimension of dynamic viscosity is:
- GATE 2023 CE (CE2) Q33 – The pressure in a pipe at X is to be measured by an open manometer as shown in figure. Fluid A is oil with a specific gravity of 0.8 and Fluid B is…
- GATE 2024 CE (CE2) Q24 – The following figure shows a plot between shear stress and velocity gradient for materials/fluids P, Q, R, S, and T. Which one of the following…
- GATE 2024 CE (CE1) Q59 – A 5 m × 5 m closed tank of 10 m height contains water and oil, and is connected to an overhead water reservoir as shown in the figure. Use w = 10…
- GATE 2025 CE (CE2) Q60 – The shaft of a 6 m wide gate in the figure will fail at a moment of 3924 kN.m about the hinge P. The maximum value of water depth h (in m) that the…
- GATE 2026 CE (CE2) Q53 – The cross section of a 0.5 m wide vertical gate holding water and oil is shown in the figure. The unit weights of water and oil are 10 kN/m3 and 7.5…