GATE Fluid Mechanics: Continuity, momentum and energy equations – Previous Year Questions
10 GATE previous year questions on Continuity, momentum and energy equations (Fluid Mechanics, Civil Engineering) with answers and explanations, from every paper.
10 questions worth 16 marks in all (4 1-mark, 6 2-mark). Asked between 2016 and 2025, so you can see how the topic has been tested over time.
- GATE 2017 CE (CE1) Q59 – Water passes through the horizontal 90° bend and nozzle shown, discharging to the atmosphere. Gauge pressure at section 1–1 is 140 kPa. Inlet diameter…
- GATE 2016 CE (CE2) Q55 – A square plate is suspended vertically from one of its edges using a hinge support as shown in figure. A water jet of 20 mm diameter having a velocity…
- GATE 2018 CE (CE1) Q22 – The conventional Bernoulli equation applies to .
- GATE 2019 CE (CE2) Q23 – The steady velocity field is v=2 i+(x+y) j+xyz k. Find fluid acceleration at (1,1,2).
- GATE 2019 CE (CE1) Q32 – A water duct contracts gradually from diameter 30 cm to 15 cm. A differential mercury manometer is arranged as shown and reads 8 cm deflection during…
- GATE 2021 CE (CE2) Q50 – A hose discharges water at 50 m/s and 45° above horizontal. Neglect air resistance and take g=9.81 m/s². Find maximum height above the nozzle in m to…
- GATE 2021 CE (CE2) Q59 – An ideal vertical venturimeter has inlet diameter 20 cm, throat diameter 10 cm and tap separation 30 cm. A mercury differential manometer reads 15 cm,…
- GATE 2023 CE (CE1) Q44 – A jet of water having a velocity of 20 m/s strikes a series of plates fixed radially on a wheel revolving in the same direction as the jet at 15 m/s.…
- GATE 2024 CE (CE2) Q58 – A 2 m × 1.5 m tank of 6 m height is provided with a 100 mm diameter orifice at the center of its base. The orifice is plugged and the tank is filled…
- GATE 2025 CE (CE1) Q30 – For the Bernoulli's equation to be applicable in a fluid flow situation, which of the following conditions is/are to be satisfied: