The GATE Grind

GATE Highway Pavements: Design of flexible and rigid pavements – Previous Year Questions

17 GATE previous year questions on Design of flexible and rigid pavements (Highway Pavements, Civil Engineering) with answers and explanations, from every paper.

17 questions worth 27 marks in all (7 1-mark, 10 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.

  1. GATE 2016 CE (CE2) Q31 (1 mark, Multiple choice) – In the context of the IRC 58-2011 guidelines for rigid pavement design, consider the following pair of statements. I: Radius of relative stiffness is…
  2. GATE 2017 CE (CE2) Q64 (2 marks, Numerical answer) – Concrete pavements P and Q have the same length, breadth, elastic modulus and Poisson ratio. P has thickness h and subgrade-reaction modulus K; Q has…
  3. GATE 2018 CE (CE2) Q27 (1 mark, Multiple choice) – According to IRC:37-2012 referred to in the paper, which parameter controls subgrade rutting in flexible pavements?
  4. GATE 2018 CE (CE1) Q64 (2 marks, Numerical answer) – Design life is 15 years, lane distribution factor 0.75, annual commercial-traffic growth 6%, vehicle damage factor 4 and initial traffic at…
  5. GATE 2019 CE (CE2) Q21 (1 mark, Multiple choice) – Structural failures considered in mechanistic bituminous-pavement design are .
  6. GATE 2019 CE (CE2) Q44 (2 marks, Multiple choice) – In one hour, a flexible pavement carries 80 two-axle buses with each axle load 40 kN and 160 two-axle trucks with front and rear axle loads 40 and 80…
  7. GATE 2019 CE (CE1) Q22 (1 mark, Multiple choice) – An isolated concrete pavement slab of length L rests on a frictionless base. Top and bottom temperatures are T t and T b, respectively, with T t>T b.…
  8. GATE 2019 CE (CE1) Q58 (2 marks, Numerical answer) – Tie bars of diameter 12 mm join concrete pavement slabs. Working tensile stress is 230 MPa, average bond strength 2 MPa and joint gap 10 mm. Ignoring…
  9. GATE 2020 CE (CE2) Q30 (1 mark, Numerical answer) – Find vehicle damage factor for a 15 tonne axle relative to a standard 8 tonne axle, to two decimals.
  10. GATE 2020 CE (CE1) Q41 (2 marks, Multiple choice) – A dowel is placed at a concrete contraction joint. Contraction cracks occur at predetermined locations. Which arrangement shows correct dowel…
  11. GATE 2022 CE (CE1) Q65 (2 marks, Numerical answer) – For the dual-wheel carrying assembly shown in the figure, P is the load on each wheel, a is the radius of the contact area of the wheel, s is the…
  12. GATE 2024 CE (CE2) Q29 (1 mark, Multiple choice) – Various stresses in jointed plain concrete pavement with slab size of 3.5 m × 4.5 m are denoted as follows: Wheel load stress at interior = S wli; at…
  13. GATE 2024 CE (CE1) Q64 (2 marks, Numerical answer) – The following data is obtained from an axle load survey at a site: Average rear axle load = 12000 kg Number of commercial vehicles = 800 per day The…
  14. GATE 2025 CE (CE2) Q18 (1 mark, Multiple choice) – The recommended minimum traffic growth rate and design period considered for structural design of flexible pavements for national highways in India as…
  15. GATE 2025 CE (CE2) Q43 (2 marks, Multiple choice) – Match the following in Column I with Column II. Column I Column II --- --- (1) Vehicle Damage Factor A. Stability of subgrade soil (2) Passenger Car…
  16. GATE 2026 CE (CE2) Q40 (2 marks, Multiple choice) – Consider the following statements with respect to rigid pavements: Statement-1: Bottom-up cracking (BUC) in rigid pavements is caused at the edge of…
  17. GATE 2026 CE (CE2) Q45 (2 marks, Multiple select) – Which of the following statements is/are TRUE with respect to the type of stresses to be considered for the design of rigid pavements?