GATE Fluid Mechanics and Mechanical Operations: Particle size, size reduction and classification – Previous Year Questions
5 GATE previous year questions on Particle size, size reduction and classification (Fluid Mechanics and Mechanical Operations, Chemical Engineering) with answers and explanations, from every paper.
5 questions worth 7 marks in all (3 1-mark, 2 2-mark). Asked between 2019 and 2026, so you can see how the topic has been tested over time.
- GATE 2019 CH Q17 – Consider a cylinder of diameter D and length D, a sphere of diameter D, and a cube of side D. Which stated relation between their sphericities is…
- GATE 2025 CH Q41 – A catalyst particle is modeled as a symmetrical double cone solid as shown in the figure. For each conical sub-part, the radius of the base is r and…
- GATE 2026 CH Q11 – Which one of the following is NOT a type of chain conveyor?
- GATE 2026 CH Q30 – Consider two successive screen sizes in the Tyler standard screen scale, viz. 150 meshes per inch and 200 meshes per inch. Their linear sizes of the…
- GATE 2026 CH Q45 – The gross energy requirement, to reduce a very large feed of coal to such a size that 80% of the product passes through a 100 µm screen, is 13 kWh per…