GATE 2024 XE — all source sections – Previous Year Questions with Solutions
All 175 questions of GATE 2024 XE — all source sections with answers and explanations. Read each question, then practise it by topic or as a full paper.
175 questions worth 275 marks in all (75 1-mark, 100 2-mark). Subjects covered: Fluid Mechanics (XE1) (22), Materials Science (XE2) (22), Solid Mechanics (XE3) (22), Thermodynamics (XE4) (22), Polymer Science and Engineering (XE5) (22), Food Technology (XE6) (22), Atmospheric and Oceanic Sciences (XE7) (22), Engineering Mathematics (XE0) (11).
Practise this paper in The GATE Grind →
- Question 1 – If '→' denotes increasing order of intensity, then the meaning of the words [walk → jog → sprint] is analogous to [bothered → → daunted]. Which one of…
- Question 2 – Two wizards try to create a spell using all the four elements, water, air, fire, and earth. For this, they decide to mix all these elements in all…
- Question 3 – In an engineering college of 10,000 students, 1,500 like neither their core branches nor other branches. The number of students who like their core…
- Question 4 – For positive non-zero real variables x and y, if (x+y2)=12[(x)+(y)], then, the value of xy+yx is
- Question 5 – In the sequence 6, 9, 14, x, 30, 41, a possible value of x is
- Question 6 – Sequence the following sentences in a coherent passage. P: This fortuitous geological event generated a colossal amount of energy and heat that…
- Question 7 – A person sold two different items at the same price. He made 10% profit in one item, and 10% loss in the other item. In selling these two items, the…
- Question 8 – The pie charts depict the shares of various power generation technologies in the total electricity generation of a country for the years 2007 (Coal…
- Question 9 – A cube is to be cut into 8 pieces of equal size and shape. Here, each cut should be straight and it should not stop till it reaches the other end of…
- Question 10 – In the 4 × 4 array shown below, each cell of the first three rows has either a cross (X) or a number. Row 1: 1, X, 4, 3; Row 2: X, 5, 5, 4; Row 3: 3,…
- Question 11 – Let f be2π-periodic, with f(x)=+x for - x<0 and f(x) = 0 for 0 x<. If F is its Fourier series, find F(-/2)+F(0).
- Question 12 – A nonzero quadratic polynomial y satisfies (2+x2)y+xy-ky=0, with real k and y(1) = 1. Find 01 2y\,dx.
- Question 13 – Four cities form the cycle C1–C2–C3–C4–C1 with exactly those four direct roads. Each road is independently blocked with probability1/3. E1 is…
- Question 14 – For f(x)=x2(1+x) on[0,1], the mean-value identity is f(x+h)=f(x)+hf(x+ h) with 0<θ<1. Find h0(x,h).
- Question 15 – A3 × 3 matrix A has eigenvalues2,3,4. For nonzero integer k,A-1=(A2-9A)/(2k)+(13/k)I. Find k.
- Question 16 – The equation x2y-3xy+(k+2)y=0 transforms under t = ln x, D = d/dt to (D-2)2y=0. Find integer k.
- Question 17 – Approximate 01/2e-x2dx using the trapezoidal rule with h = 1/8, to two decimals.
- Question 18 – Consider 𝑓(𝑧) = 𝑒𝑧, where 𝑧 = 𝑥 + 𝑖𝑦and 𝑖 = √ − 1. Which of the following statements is correct ?
- Question 19 – For same-order square matrices P, Q, which expressions necessarily equal (P + 2Q)²?
- Question 20 – For α>0, 0 x/1ey3\,dy\,dx=e-1. Find integer α.
- Question 21 – For F=(2x+y2) i+(2xy+3y) j, let m= C m F d r. C1 is the unit-circle arc from (1,0) to(0,1), and C2 the straight segment with those endpoints. Find…
- Question 22 – Which graph correctly represents apparent viscosity η against shear rate du/dy for a pseudoplastic fluid?
- Question 23 – The locus of temporary locations of all particles that have passed through a fixed point in the flow field at a particular instant is known as
- Question 24 – For velocity components u, v, w along x, y, z, which expression gives vorticity in the y–z plane?
- Question 25 – For the laminar, incompressible flow over a flat plate with uniform free stream velocity, the axial pressure gradient within the boundary layer is
- Question 26 – Let 𝑟 , 𝑉⃗ , and 𝑚 be position vector, velocity vector, and mass, respectively in a control mass system. Which one of the following properties is…
- Question 27 – The hydraulic diameter for a circular pipe of radius 𝑅 is
- Question 28 – For incompressible, laminar, fully-developed flow through a circular pipe, Darcy friction factor and Fanning friction factor are represented as 𝑓 and…
- Question 29 – For an immersed neutrally buoyant body to be in stable equilibrium, the center of gravity of the body is directly
- Question 30 – The absolute pressure in a chamber is measured as 400 mm Hg at a location where the atmospheric pressure is 700 mm Hg. A vacuum gauge connected to the…
- Question 31 – An incompressible Newtonian liquid of densityρ and viscosityµ forms a uniform falling film of thickness h on a vertical plate. Gravity alone drives…
- Question 32 – A one-eighth scale model of a car is to be tested in a wind tunnel. If the air velocity over the car is 16 m/s, what should be the air velocity (in…
- Question 33 – A set of basic dimensions, mass, length, and time are represented by M, L, and T, respectively. What will be the dimensions of pressure in M-L-T…
- Question 34 – Consider a fluid flow around an airfoil as shown in figure. The directions of drag force and lift force, respectively are along
- Question 35 – A vessel which contains a volatile liquid and its vapour is connected with a mercury manometer as shown in figure. Both the liquid and vapour phases…
- Question 36 – A steady one-dimensional flow has u(x) = a/(b − x)² with a = 8 m³/s, b = 4 m. Find acceleration at x = 2 m in m/s², as an integer.
- Question 37 – Consider two parallel plates separated by a distance of 1 cm filled with a Newtonian fluid of viscosity 10-3 Pa.s. The top plate is moving with a…
- Question 38 – A circular water jet of diameter 50 mm impinges with a velocity of 18 m/s normal to a plate. The density of water is 1000 kg/m3 and gravity force is…
- Question 39 – Water flows steadily through a horizontal1-m-diameter pipe at inlet speed12 m/s. A0.6-m circular side hole loses4.53 m³/s. Find downstream main-pipe…
- Question 40 – Fully developed laminar pipe flow has u z=-R24 p z(1-r2/R2). If u z=1K(-R2 p z), find integer K.
- Question 41 – A two-dimensional velocity potential is φ = − (axy + bx² − by²) m²/s, with a = 2 s⁻¹, b = 0.5 s⁻¹. Find speed at x = 2 m, y = 1 m, as an integer in…
- Question 42 – A steady incompressible irrotational flow passes through a horizontal concentric reducer from 12-cm to 4-cm diameter. Pressures are55 and 27 kPa.…
- Question 43 – Flat-plate flow has U∞ = 1 m/s, ν = 10⁻⁶ m²/s, ρ = 1 kg/m³ and profile u=U [3y/(2)-y2/(22)], with =4.64x/Re x. Find wall shear at x = 1 m as a…
- Question 44 – The correct combination of phases in the one-component H2O phase diagram, as given below, is
- Question 45 – Mechanical behaviour of a crystalline ceramic material is best described as
- Question 46 – Differential scanning calorimetry involves measurement of
- Question 47 – In ball milling of ceramic powder, selection of grinding media depends on the difference between grinding media and powder particles.
- Question 48 – Which one of the following unit cell parameters represents a tetragonal crystal system?
- Question 49 – Which of the following types of materials exhibit (s) positive magnetic susceptibility?
- Question 50 – Which of the following is/are responsible for pitting corrosion in a metal ?
- Question 51 – In thermogravimetric analysis (TGA), weight change of a material sample during decomposition with temperature is shown in the figure below. Wi and Wf…
- Question 52 – The work done by a body expanding from an initial state A to the final state B, as shown in the P-V diagram below, is (in units of litre-atm) (rounded…
- Question 53 – For the depicted binary phase diagram, which Gibbs-free-energy-versus-composition plot is qualitatively correct at T0?
- Question 54 – Which depicted density-of-states g(E) schematic represents a typical intrinsic semiconductor? E is carrier energy.
- Question 55 – The Miller indices for the shaded plane shown in the unit cell below is
- Question 56 – Which E-versus-occupancy f(E) curve best represents the hot end of a metal rod in the Seebeck-effect setting? EF is Fermi energy.
- Question 57 – In a typical light emitting diode (LED), which of the following type (s) of materials is/are used?
- Question 58 – Which of the following options is/are true for glass transition temperature Tg ?
- Question 59 – Which depicted ionic-solid defect arrangements represent either a Frenkel or a Schottky defect?
- Question 60 – For first-order rate constant k and absolute temperature T, which depicted temperature-dependence plots are correct?
- Question 61 – For chemical vapour deposition (CVD) process, which of the following statements is/are correct?
- Question 62 – Aluminium has room-temperature conductivity3.8 × 10⁷(Ω m)⁻¹ and electron mobility0.0012 m²/(V s). Find free-electron density as a coefficient of 10²⁷…
- Question 63 – Hydrogen diffuses steadily through a2-mm palladium membrane of cross-section1000 mm². Surface concentrations are1.5 and 0.3 kg/m³, and D = 1.0 × 10⁻⁸…
- Question 64 – The first five FCC powder-diffraction Bragg angles are21.65°,25.21°,37.06°, x,47.58°. Find the missing fourth angle x in degrees, to one decimal.
- Question 65 – Consider a unidirectionally aligned continuous glass fibre reinforced epoxy composite with 40 vol. % reinforcement. The elastic modulus of the…
- Question 66 – The engineering stress (𝜎) vs. engineering strain (𝜀) curve obtained by conducting uniaxial tension test on a steel specimen is shown in the figure…
- Question 67 – An L-shaped rigid member is fixed at the midpoint of a simply-supported beam, as shown in figure (i). The member is subjected to a vertically downward…
- Question 68 – A block at rest is pushed horizontally rightward through its centre of gravity by P. W is weight, N the resultant surface normal and F friction. Which…
- Question 69 – Mass M hangs from a frictionless massless movable pulley. An inextensible massless rope passes around it; one end is fixed overhead and the other is…
- Question 70 – The shown simply supported rectangular beam (width w, height h) carries equal loads P at L/4 from each end. At midspan, the origin O is the section…
- Question 71 – An ice-skater starts spinning during her performance. As she retracts her arms and legs closer to her body, her angular velocity .
- Question 72 – A solid circular shaft of diameter 100 mm is subjected to a torque 3𝜋 kNm. Which of the following statements about the state of stress in the shaft…
- Question 73 – A70-mm bar of area10 mm², E = 70000 MPa is fixed at its left end. Its right end connects in series to a spring of stiffness10⁷ N/m, whose free end O…
- Question 74 – A particle of mass 1 kg is attached to one end of a spring having stiffness of 125 N/m. The free length of the spring is 100 mm. The system is rotated…
- Question 75 – A rosette has gauges p, q, r at 0°,45°,90° to x. Readings are εp = 150 × 10⁻⁶, εq = 180 × 10⁻⁶, εr = − 90 × 10⁻⁶. Find engineering shear strain γxy.
- Question 76 – The rigid bar PQR is hinged at P and joined by identical vertical links QS and RT to fixed supports S, T. Both links have the same material and…
- Question 77 – A pin-jointed truss has a pin support at the point E and a roller support at the point F. A horizontal force P is applied at pin H as shown in the…
- Question 78 – Two identical rigid slender bars of length 2L and mass 𝑚 are acted upon by a transverse force F at one of the ends as shown in the figure. In the…
- Question 79 – A stress tensor is diag (280, σ0, − 60) MPa and uniaxial yield strength is 400 MPa. Which σ0 values give onset of Tresca yielding?
- Question 80 – A plane through Q has unit normal n = 0.6i + 0.8j and traction t = (50i + 20j) MPa. At Q, σxx = σyy. Find τxy in MPa, to two decimals.
- Question 81 – A massless rigid horizontal bar PQR is hinged at P, with PQ = 2 m, QR = 1 m. A vertical spring supports Q from below. A downward560-N load at R…
- Question 82 – A perfectly bonded two-layer rectangular beam has equal-width layers each1 mm thick. Top-layer modulus E1 is twice bottom E2. Under pure bending, find…
- Question 83 – A cantilever of total length L has inertia I1 over its fixed-end half and I2 over its free-end half, with I1 = 8I2 and common E. A transverse tip load…
- Question 84 – A2-m-inner-diameter,10-m-long pressure vessel consists of two flanged semicylindrical halves joined by two longitudinal bolt rows,100 bolts in each…
- Question 85 – A turn-table is rotating about its center with an angular velocity of 2 rad/s in the counter-clockwise direction. There is a groove in the turn-table…
- Question 86 – The system shown in the figure is in static equilibrium. The spring is massless and has a spring constant of K = 1 kN/m. The free length of the spring…
- Question 87 – A1-m-square block of mass10 kg rests on a horizontal surface with static friction coefficient0.75. A gradually increased horizontal force acts at…
- Question 88 – A source at TH transfers the same heat to a sink at TL1 in case A and TL2 in case B, with TL1<TL2<TH. Which statement is true?
- Question 89 – For van der Waals gas P=RT/(v-b)-a/v2, evaluate ( v/ T) P( P/ v) T( T/ P) v.
- Question 90 – The temperature of 10g of liquid water (𝑐𝑝 = 4.2J/g.K) in an insulated container is raised by 5K by stirring. The amount of heat transferred to…
- Question 91 – The figure shows four different processes labeled 1, 2, 3, and 4 for the same closed system containing an ideal gas. The curves labeled 𝑇1, 𝑇2, and…
- Question 92 – For a simple ideal Rankine cycle, what happens when steam superheating is added?
- Question 93 – An ideal-gas mixture has total P, V, T. Component i has partial pressure Pi, mole amount Ni and temperature Ti. Which statements are true?
- Question 94 – Rigid impermeable containers A, B hold ideal gas and exchange heat only with each other. At equilibrium, which conditions must hold? P, V, N, T denote…
- Question 95 – Following data is for an actual vapour compression refrigeration cycle. Enthalpy at compressor inlet: 246kJ/kg Enthalpy at compressor exit: 286kJ/kg…
- Question 96 – A rigid tank, initially at 1bar and300K, contains 5moles of 𝑂2, 4moles of 𝑁2 , and 3moles of 𝐻2 . From this tank, 2moles of 𝑂2 are removed…
- Question 97 – A fixed mass of an ideal gas undergoes two different cycles M and N as shown in the Pressure (𝑃) – Volume (𝑉) diagrams. Based on the information…
- Question 98 – In a graph with Helmholtz function on the 𝑦–axis and volume on the 𝑥–axis, the slope of the isothermal curves for a finite volume system containing…
- Question 99 – Match M1:v, M2:P, M3:s, M4:T with N1:- v T, N2: v T, N3: T v, N4:- T v, N5:h P s, N6:-h s P, N7:-h P s, N8:h s P. Here ψ is specific Helmholtz energy,…
- Question 100 – 10kg of water at 300K is poured into a bucket containing 10kg of water at 350K. Heat capacity of water is 4.2kJ/kg.K . Neglecting any heat losses…
- Question 101 – A Carnot engine operates between two temperatures T1 and T2 such that T1 > T2. If the thermal efficiency of the engine is to be increased by changing…
- Question 102 – A gas obeys Pv/(RT)=1+BP, where B depends on temperature. Find ( h/ P) T.
- Question 103 – Consider the following data from a Brayton cycle. Enthalpy at inlet to turbine: 1400kJ/kg Enthalpy at exit of turbine: 880kJ/kg Enthalpy at exit of…
- Question 104 – An ideal gas undergoes a series of reversible steady state, steady flow processes between states 1, 2, and 3. Process 1→2 satisfies the relation 𝑃 +…
- Question 105 – Air enters a horizontal nozzle at 350 K,350 kPa,3 m/s with flow2.5 kg/s. It exits at 101.5 kPa,305 K, Mach9/7. Use γ = 1.4, cp = 1.011 kJ/(kg K), R =…
- Question 106 – A substance melts at 273 K,1 bar. At that state, solid density is 900 kg/m³, liquid density1000 kg/m³ and latent heat300 kJ/kg. Treat these properties…
- Question 107 – Cool100 mol moist air at 70% relative humidity from 70°C to 50°C at constant1 bar. Saturation vapour pressures are31.16 kPa at 70°C and 12.34 kPa at…
- Question 108 – A rigid insulated tank containing an ideal gas at 300 K and 1bar is being filled from an external pressurized line supplying the same gas at 300 K…
- Question 109 – A spring-loaded piston contains2 kg wet steam at 90°C, quality0.1. Heating takes it to 800 kPa,250°C. At90°C, use Psat = 70 kPa, vf = 0.001 m³/kg, vg…
- Question 110 – Phenol-formaldehyde resin is prepared by
- Question 111 – Melting phenomenon in a semi-crystalline polymer is a order phase transition.
- Question 112 – A certain polymer synthesized in the laboratory shows that all the chains have same number of repeat units (i.e., same degree of polymerization). The…
- Question 113 – Nitrile rubber is the copolymer of
- Question 114 – A suitable physical compatibilizer of a binary blend of poly (ethylene) and poly (propylene) is .
- Question 115 – The ‘die swell’ phenomenon exhibited by a polymer melt is due to
- Question 116 – Thermoforming operation of semi-crystalline polymers with glass transition temperature, 𝑇𝑔, and melting temperature, 𝑇𝑚, is carried out at a…
- Question 117 – Feedstock recycling of poly (ethylene terephthalate) is carried out by
- Question 118 – Which of the following polymers is/are synthesized by ring opening polymerization?
- Question 119 – In terminal-model radical copolymerization, P1 is M1* + M1→M1* with k11; P2 is M1* + M2→M2* with k12; P3 is M2* + M1→M1* with k21; P4 is M2* + M2→M2*…
- Question 120 – Match PVC additives P dibutyltin maleate, Q epoxidized soybean oil, R chlorinated paraffin wax, S calcium stearate with 1 lubricant,2 extender,3 heat…
- Question 121 – Match P notched Izod impact strength, Q flexural strength, R dielectric strength, S complex viscosity with units1 Pa s,2 J/m,3 MPa,4 kV/cm.
- Question 122 – Melt-flow index MFI depends on polymer molecular weight MW and melt viscosity η. Which proposed trends are correct?
- Question 123 – Biaxially oriented poly (propylene) exhibits high clarity because layering of the crystalline structures
- Question 124 – If a given poly (ethylene) sample with specific volume, 𝑣 = 1.042 × 10 − 3 m3 kg − 1 shows: specific volume of the crystalline fraction, 𝑣𝑐 =…
- Question 125 – The glass transition temperature (𝑇𝑔) of poly (2,6-dimethyl-p-phenylene oxide) (PPO) is 206.8 °C and the 𝑇𝑔 of poly (styrene) (PS) is 90 °C. The…
- Question 126 – A unidirectional composite is prepared using 70% by volume of epoxy matrix and 30% by volume of carbon fibre. The elastic modulus of the epoxy matrix…
- Question 127 – Polyamide 66 is prepared by the condensation polymerization of 0.08 mol of hexamethylenediamine with 0.08 mol of adipic acid. At the end of the…
- Question 128 – A monodisperse polymer sample of molecular weight 10,000 gmol − 1 is mixed with another monodisperse sample of the same polymer of molecular weight…
- Question 129 – Carreau viscosity is = 0[1+()2](n-1)/2 with positive parameters. Raising shear rate from 1 to 100 s⁻¹ lowers viscosity tenfold. Given n = 0.4 and η0 =…
- Question 130 – The figure plots reduced viscosity ηsp/c versus concentration c for two samples of the same polymer following Huggins behaviour. The common…
- Question 131 – The linear viscoelastic behaviour of a polymer is described by the Kelvin-Voigt model consisting of a spring element of elastic modulus 10 MPa in…
- Question 132 – Which one of the following fungi produces aflatoxins?
- Question 133 – Under standard conditions in animal feeding studies, the weight gained (in grams) per gram of protein consumed by an animal is termed as
- Question 134 – Xeropthalmia is caused due to the deficiency of
- Question 135 – Which one of the following steps is used to remove phosphatides from crude oil in the refining process?
- Question 136 – The unique flavor of chocolate and cocoa is due to the formation of
- Question 137 – Which one of the following statements regarding Hazard Analysis Critical Control Point (HACCP) plan is NOT correct?
- Question 138 – The product of cabbage fermentation by Leuconostoc mesenteroides is
- Question 139 – Which one of the following absorbents is NOT used as an ethylene absorber in active packaging of fruits and vegetables?
- Question 140 – Thermal resistance constant (z-value) is defined as the change in temperature required to reduce the decimal reduction time of a microorganism by…
- Question 141 – Which one of the following statements regarding moisture sorption isotherms of a dried food is NOT correct?
- Question 142 – Processing of fluid milk at 72 ℃ for 15 seconds is termed as
- Question 143 – Match antinutritional factors P lectin, Q stachyose, R phytate, S Kunitz-type inhibitor with 1 flatulence,2 divalent-cation chelation and reduced…
- Question 144 – Which of the following fatty acids is/are known to increase the low density lipoprotein (LDL)-cholesterol?
- Question 145 – The addition of which of the following to high-methoxyl pectin will result in gel formation?
- Question 146 – Which of the following steps in food processing is/are used to reduce the acrylamide formation in food products?
- Question 147 – Which of the following enzymes is/are used for the production of high fructose syrup (HFS) from corn starch?
- Question 148 – Which of the following is/are typical characteristic (s) of a fungal cell?
- Question 149 – Which of the following statements is/ are correct regarding food and water borne disease and the class of causative microorganisms?
- Question 150 – Which of the following statements is/ are true?
- Question 151 – A 10 kg tomato pulp is concentrated from an initial moisture content of 90% (wet weight basis) to 35% (wet weight basis). The weight of the…
- Question 152 – The surface temperature of a hot plate is 175 ℃. The ambient air temperature is 25 ℃. The rate of heat transfer per unit area in kW.m-2 from the plate…
- Question 153 – A tubular-bowl centrifuge separates an aqueous phase of density950 kg/m³ from oil of density900 kg/m³. Light- and heavy-liquid outlet radii are4.5 and…
- Question 154 – A westerly wind is blowing in the Northern Hemisphere. What is the direction of net mass transport in the Ekman layer?
- Question 155 – Which one of the following feature is NOT necessary for the formation of Indian summer monsoon?
- Question 156 – The work done by Coriolis force is
- Question 157 – If the isobars and isopycnals are parallel to each other, the flow is said to be
- Question 158 – Transfer of energy between ocean and atmosphere in the form of sensible heat flux is due to
- Question 159 – A value of outgoing long-wave radiation (OLR) < 200 Wm−2 over the tropical oceans indicates .
- Question 160 – Which of the following is a correct statement?
- Question 161 – Upwelling region has .
- Question 162 – Density of sea-water does not directly depend on .
- Question 163 – Which of the following is/are true about ocean circulation?
- Question 164 – Svedrup’s equation deals with:
- Question 165 – pH of the water in the oceans is/are directly affected by:
- Question 166 – Billow clouds indicate:
- Question 167 – Consider an atmospheric flow at 45 °N, which is parallel to latitude and isobars. Which of the following is/are true when there is no friction?
- Question 168 – The given figure shows a schematic of dry, moist, and environmental lapse rates. Which of the following is/are correct statements?
- Question 169 – Match P pressure-gradient+centrifugal+Coriolis balance in anticlockwise rotation, Q pressure-gradient+centrifugal balance in either rotation, R…
- Question 170 – During summer monsoon season, water from Arabian Sea spreads over the south- western Bay of Bengal. This leads to
- Question 171 – A still lake’s20-m mixed layer absorbs a constant1360 W/m² for8 h, uniformly through its depth. Use density1025 kg/m³ and cp3850 J/(kg K). Find…
- Question 172 – A homogeneous incompressible steady ocean has20-m mixed-layer depth and zonal/meridional velocity gradients−5×10⁻⁸ and−8.3×10⁻⁸ s⁻¹. For area100…
- Question 173 – Wind speed over the ocean is 10 m/s, drag coefficient1.4×10⁻³ and air density1.3 kg/m³. Find bulk wind-stress magnitude in Pa, to three decimals.
- Question 174 – Stations A, B at 30°N are10 km apart and have1-m sea-surface-height difference. Using Earth angular velocity10⁻⁴ s⁻¹, find geostrophic-current…
- Question 175 – A stationary equatorial air parcel moves north while conserving absolute vorticity. At its new location relative vorticity is−10⁻⁴ s⁻¹. With Earth…