Mining Methods and Machinery · Mining Methods · 2 marks · Numerical answer
For a development heading, the blasting parameters are: cross-section 6.0 m × 5.0 m; total number of holes 72; number of trimmer holes 30; depth of each hole 3.5 m; charge per hole except trimmers 3.5 kg; charge per trimmer hole 1.8 kg; pull per round 90% of hole depth. The powder factor for the development round, in m$^3$/kg, is (round off to 2 decimal places).
We are sorry we couldn't write detailed soluition for this, we are working on it!, please consider asking your own AI, its just 2-3 clicks with very minimum effort
More Mining Methods questions
GATE 2020 MN Q64– A vertical stoping block of length 60.0 m, height 40.0 m and average width 1.5 m has sharp…
GATE 2026 MN Q25– A20 m thick orebody dips75°. Both ore and host rock are strong, and production drilling…
GATE 2026 MN Q57– A dragline bucket holds20 m³ with fill factor0.9. Digging/filling takes20 s, total…
GATE 2026 MN Q59– The cut-and-fill stope dimensions are shown. Pillars are4×4 m, separated by clear13 m…
GATE 2026 MN Q61– A bord-and-pillar panel has24 pillars of40×40 m centre-to-centre spacing,4 m galleries…
GATE 2025 MN Q12– A steeply dipping metalliferous deposit is not susceptible to spontaneous heating. Broken…