Select ALL CORRECT option(s) which can be considered to check whether the flexural stresses in a prestressed concrete beam are within the allowable stresses at the transfer and the service stages.
Correct answer: (A) Limiting zone for prestressing; (B) Magnel's graph; (D) Load balancing method
Explanation
The limiting zone, Magnel's graph and the load balancing method are all used to make sure the stresses at transfer and under service load stay within the permitted limits. The Hoyer effect describes how prestress is transferred to the concrete by bond in pre-tensioned members, so it does not check stresses.
More Design and detailing of beams and slabs questions
GATE 2026 CE (CE2) Q48– A 250 mm wide × 600 mm deep rectangular concrete beam is prestressed by means of 4…
GATE 2025 CE (CE1) Q15– As per IS 456:2000 provisions for two-way slabs with continuous edges, the longitudinal…
GATE 2025 CE (CE2) Q30– The design shear strength of a reinforced concrete rectangular beam with a width of 250 mm…
GATE 2025 CE (CE2) Q40– Consider a reinforced concrete beam section of 350 mm width and 600 mm depth. The beam is…
GATE 2025 CE (CE2) Q54– A reinforced concrete beam has a support section with width of 300 mm and effective depth…
GATE 2024 CE (CE1) Q17– The following figure shows the arrangement of formwork for casting a cantilever RC beam.…