GATE Solid Mechanics: Transformation of stress, Mohr circle – Previous Year Questions
14 GATE previous year questions on Transformation of stress, Mohr circle (Solid Mechanics, Civil Engineering) with answers and explanations, from every paper.
14 questions worth 22 marks in all (6 1-mark, 8 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 CE (CE2) Q42 – For the stress state (in MPa) shown in the figure, the major principal stress is 10 MPa. The shear stress τ is
- GATE 2016 CE (CE1) Q39 – The magnitudes of vectors P, Q and R are 100 kN, 250 kN and 150 kN, respectively as shown in the figure. The respective values of the magnitude (in…
- GATE 2018 CE (CE2) Q48 – An 8 m simply supported elastic beam has rectangular cross section 100 mm × 200 mm and a 10 kN/m UDL over its entire span. The maximum principal…
- GATE 2019 CE (CE2) Q39 – The plane-stress element shown has horizontal tensile stress 80 MPa, vertical compressive stress 20 MPa and clockwise shear 25 MPa. Through what…
- GATE 2020 CE (CE2) Q16 – Which stress state is represented by the shown Mohr circle?
- GATE 2020 CE (CE1) Q17 – A two-dimensional stress state at P is []=bmatrix xx& xy\\ xy& yybmatrix. Find the necessary and sufficient condition for pure shear on rotated axes.
- GATE 2021 CE (CE1) Q30 – The figure shows xx=40 MPa, yy=35.6 MPa and transformed XX=120 MPa, with the inclined face at 30° to x and the X-normal at 60°. Find xy in MPa to one…
- GATE 2022 CE (CE1) Q13 – The hoop stress at a point on the surface of a thin cylindrical pressure vessel is computed to be 30.0 MPa. The value of maximum shear stress at this…
- GATE 2023 CE (CE2) Q39 – In a two-dimensional stress analysis, the state of stress at a point is shown in the figure. The values of length of PQ, QR, and RP are 4, 3, and 5…
- GATE 2023 CE (CE1) Q53 – The infinitesimal element shown in the figure (not to scale) represents the state of stress at a point in a body. What is the magnitude of the maximum…
- GATE 2024 CE (CE1) Q14 – The three-dimensional state of stress at a point is given by = pmatrix 10 & 0 & 0 \\ 0 & 40 & 0 \\ 0 & 0 & 0 pmatrix MPa. The maximum shear stress at…
- GATE 2024 CE (CE1) Q38 – Find the correct match between the plane stress states and the Mohr's circles.
- GATE 2025 CE (CE2) Q39 – Let the state of stress at a point in a body be the difference of two plane states of stress shown in the figure. Consider all the possible planes…
- GATE 2026 CE (CE2) Q17 – Which one of the following stress conditions represents the state of pure shear stress?