GATE Structural Analysis: Deflections of determinate beams, frames and trusses – Previous Year Questions
23 GATE previous year questions on Deflections of determinate beams, frames and trusses (Structural Analysis, Civil Engineering) with answers and explanations, from every paper.
23 questions worth 41 marks in all (5 1-mark, 18 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 CE (CE1) Q16 – Consider the plane truss with load P as shown in the figure. Let the horizontal and vertical reactions at the joint B be HB and VB, respectively and…
- GATE 2016 CE (CE1) Q41 – A 3 m long simply supported beam of uniform cross section is subjected to a uniformly distributed load of w = 20 kN/m in the central 1 m as shown in…
- GATE 2016 CE (CE1) Q42 – Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in…
- GATE 2016 CE (CE1) Q43 – A plane truss with applied loads is shown in the figure. The members which do not carry any force are
- GATE 2017 CE (CE2) Q41 – The two prismatic beams shown have the same flexural rigidity 1000 kN m². If their midspan deflections are 1, 2, the correct comparison is .
- GATE 2018 CE (CE2) Q17 – A 10 kN vertical load acts on an internal hinge L/4 from roller support Q of a beam of length L, as shown. The vertical reaction at Q is .
- GATE 2018 CE (CE1) Q40 – The simply supported uniform-EI beam PQ carries moments M and 2M as shown. The slope at P is .
- GATE 2018 CE (CE1) Q53 – The deformable pin-jointed truss has the geometry, loading and member rigidities shown. Given E=21011 N/m², A = 10 mm², L = 1 m and P = 1 kN,…
- GATE 2019 CE (CE1) Q49 – The shown portal frame has a hinge at P and roller at R. A 50 kN horizontal load acts at R. PQ = 5 m, QR = 10 m and each member has EI=106\ kN\,m2.…
- GATE 2020 CE (CE2) Q39 – Structure RST shown has pin R, roller S and rigid joint S. Members RS and ST have uniform EI. Consider bending only; neglect self-weight and axial…
- GATE 2020 CE (CE2) Q52 – The shown plane truss has hinge supports P and W and horizontal loads as shown. Taking tension positive and compression negative, find member XW force…
- GATE 2020 CE (CE1) Q15 – The planar truss is shown, not to scale. Neglecting member self-weight, find the number of zero-force members under load P.
- GATE 2020 CE (CE1) Q40 – The shown cantilever PQ of uniform flexural rigidity EI has concentrated moment M at midpoint R. Find free-end Q deflection.
- GATE 2021 CE (CE1) Q31 – A beam has deformation y=x2-xL. Find its curvature at midspan (integer).
- GATE 2021 CE (CE1) Q32 – Square truss EFGH has side L=3 m, pin at E, roller at H and diagonal FH. All bars have axial rigidity R=500×10³ kN. Opposite outward forces P=150 kN…
- GATE 2021 CE (CE1) Q48 – The illustrated symmetric truss has all member lengths L=2 m. Sloping and bottom members have area A=10⁴ mm², while QR has area 2A. A downward force…
- GATE 2022 CE (CE2) Q46 – Which of the following statement(s) is/are correct?
- GATE 2022 CE (CE2) Q51 – Two cantilevers UV and WX, each length 2a, have fixed ends U and X. Their rigidities are EI and 2EI. A vertical spring joins free ends V,W. P=100 kN…
- GATE 2023 CE (CE1) Q39 – Consider the pin-jointed truss shown in the figure (not to scale). All members have the same axial rigidity, AE. Members QR, RS, and ST have the same…
- GATE 2024 CE (CE2) Q37 – A linearly elastic beam of length 2l with flexural rigidity EI has negligible mass. A massless spring with a spring constant k and a rigid block of…
- GATE 2024 CE (CE2) Q49 – For the 6 m long horizontal cantilever beam PQR shown in the figure, Q is the mid-point. Segment PQ of the beam has flexural rigidity EI = 2 105 kN.m2…
- GATE 2025 CE (CE1) Q50 – For the beam and loading shown in the figure, the second derivative of the deflection curve of the beam at the mid-point of AC is given by M 08EI. The…
- GATE 2026 CE (CE1) Q39 – The plane frame has a hinge and a roller support, and is loaded as shown in the figure. Both the columns have same height. What is the absolute value…