The GATE Grind

GATE Structural Analysis: Slope-deflection and moment distribution methods – Previous Year Questions

8 GATE previous year questions on Slope-deflection and moment distribution methods (Structural Analysis, Civil Engineering) with answers and explanations, from every paper.

8 questions worth 15 marks in all (1 1-mark, 7 2-mark). Asked between 2017 and 2025, so you can see how the topic has been tested over time.

  1. GATE 2017 CE (CE1) Q50 (2 marks, Numerical answer) – For beam ABC shown, A is fixed, B and C are simple supports, AB = 4 m and BC = 6 m. AB carries 30 kN/m uniformly. The applied moment M is chosen so…
  2. GATE 2017 CE (CE2) Q52 (2 marks, Numerical answer) – For the frame shown, E=2.5104 MPa and I=8108 mm⁴ for all members. The rotation at Q, to one decimal place, is degrees.
  3. GATE 2018 CE (CE2) Q49 (2 marks, Numerical answer) – Beam P–Q–R has EI=104 kN m² and an applied 180 kN m moment at Q, as shown. Rotation at Q, to two decimals, is rad.
  4. GATE 2019 CE (CE1) Q42 (2 marks, Multiple choice) – The rigid-jointed frame QRS shown carries P at R. Neglect axial deformation. Both members have length L and stiffness EI. If support S settles by…
  5. GATE 2022 CE (CE1) Q51 (2 marks, Numerical answer) – Consider the linearly elastic plane frame shown in the figure. Members HF, FK and FG are welded together at joint F. Joints K, G and H are fixed…
  6. GATE 2023 CE (CE2) Q54 (2 marks, Numerical answer) – For the frame shown in the figure (not to scale), all members (AB, BC, CD, GB, and CH) have the same length, L and flexural rigidity, EI. The joints…
  7. GATE 2025 CE (CE1) Q29 (1 mark, Multiple select) – Consider the frame shown in the figure under the loading of 100 kN.m couples at the joints B and G. Considering only the effects of flexural…
  8. GATE 2025 CE (CE1) Q37 (2 marks, Multiple choice) – In the rigid-jointed frame shown in the figure, the distribution factor of the member AD is closest to