GATE Steel Structures: Design of beams, beam-columns and column bases – Previous Year Questions
7 GATE previous year questions on Design of beams, beam-columns and column bases (Steel Structures, Civil Engineering) with answers and explanations, from every paper.
7 questions worth 10 marks in all (4 1-mark, 3 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 CE (CE1) Q18 – The semi-compact section of a laterally unsupported steel beam has an elastic section modulus, plastic section modulus and design bending compressive…
- GATE 2018 CE (CE1) Q15 – An ISHB 350 steel column of mass 72.4 kg/m transfers factored axial load 2000 kN to an M20 concrete pedestal through a square base plate. Concrete…
- GATE 2019 CE (CE2) Q40 – A structural steel section has critical extreme-fibre bending compressive stress 1000 MPa, yield strength 250 MPa, flange width 250 mm and flange…
- GATE 2019 CE (CE2) Q48 – A rolled I-section rests on a 75 mm wide end bearing plate as shown. Flange thickness is 20 mm, web thickness 8 mm, root radius 10 mm, yield stress…
- GATE 2019 CE (CE1) Q18 – Assuming no possibility of web shear buckling, what maximum reduction in the low-shear design bending strength of a semi-compact steel section due to…
- GATE 2023 CE (CE1) Q38 – Consider the horizontal axis passing through the centroid of the steel beam cross-section shown in the figure. What is the shape factor (rounded off…
- GATE 2026 CE (CE2) Q15 – As per IS:800-2007, design of a cantilever steel beam section for its moment capacity requires fulfilment of an upper bound, expressed as: M d 1.5\, Z…