The GATE Grind

GATE Geotechnical Engineering: Sub-surface investigations: boring, SPT, CPT, plate load test – Previous Year Questions

11 GATE previous year questions on Sub-surface investigations: boring, SPT, CPT, plate load test (Geotechnical Engineering, Civil Engineering) with answers and explanations, from every paper.

11 questions worth 14 marks in all (8 1-mark, 3 2-mark). Asked between 2018 and 2026, so you can see how the topic has been tested over time.

  1. GATE 2018 CE (CE1) Q31 (1 mark, Numerical answer) – A core cutter is 130 mm high with inner and outer diameters 100 and 106 mm. Its area ratio, to two decimals, is %.
  2. GATE 2019 CE (CE2) Q61 (2 marks, Numerical answer) – A soil sampler has cutting-edge inside and outside diameters 80 and 100 mm, and sampling-tube inside and outside diameters 86 and 90 mm. Find outside…
  3. GATE 2019 CE (CE1) Q39 (2 marks, Multiple choice) – Assess: P: Lateral stress in soil tested in an oedometer is always at rest. Q: For a perfectly rigid strip footing at deeper depth in sand, vertical…
  4. GATE 2020 CE (CE1) Q21 (1 mark, Multiple choice) – SPT is performed every 1.5 m to 30 m depth. At depth 3 m, blows for three successive 150 mm penetrations are 8, 6 and 9. Find recorded N at 3 m.
  5. GATE 2021 CE (CE2) Q31 (1 mark, Numerical answer) – A Shelby sampler has internal diameter 48 mm and external diameter 52 mm. Find area ratio in percent to two decimals.
  6. GATE 2022 CE (CE2) Q31 (1 mark, Numerical answer) – The inside diameter of a sampler tube is 50 mm. The inside diameter of the cutting edge is kept such that the Inside Clearance Ratio (ICR) is 1.0 % to…
  7. GATE 2022 CE (CE1) Q33 (1 mark, Numerical answer) – At a site, Static Cone Penetration Test was carried out. The measured point (tip) resistance qc was 1000 kPa at a certain depth. The friction ratio…
  8. GATE 2023 CE (CE2) Q18 (1 mark, Multiple choice) – A standard penetration test (SPT) was carried out at a location by using a manually operated hammer dropping system with 50% efficiency. The recorded…
  9. GATE 2026 CE (CE2) Q58 (2 marks, Numerical answer) – A building is proposed in an area having thick deposit of silty clay. The water table is at the ground surface. The saturated unit weight of soil is…
  10. GATE 2026 CE (CE1) Q18 (1 mark, Multiple choice) – The name of a person in Column 1 is to be matched with the test mentioned in Column 2. Column 1 Column 2 --- --- (I) Menard (P) Dilatometer test (II)…
  11. GATE 2026 CE (CE1) Q32 (1 mark, Numerical answer) – To obtain undisturbed clay soil sample, an Area Ratio of 10 % needs to be achieved for a thin walled sampling tube. If the outer diameter of the tube…