GATE Electrical and Electronic Measurements: Instrument transformers, Digital voltmeters and multi-meters, Phase, Time and Frequency measurement – Previous Year Questions
7 GATE previous year questions on Instrument transformers, Digital voltmeters and multi-meters, Phase, Time and Frequency measurement (Electrical and Electronic Measurements, Electrical Engineering) with answers and explanations, from every paper.
7 questions worth 9 marks in all (5 1-mark, 2 2-mark). Asked between 2015 and 2025, so you can see how the topic has been tested over time.
- GATE 2017 EE (EE2) Q19 – A stationary closed Lissajous pattern has 3 horizontal tangencies and 2 vertical tangencies. The horizontal input is 3 kHz. The vertical input…
- GATE 2017 EE (EE2) Q57 – A 10½-digit timer-counter has a 100 MHz base clock. The same numerical reading occurs in frequency mode with 1 s gating and in period mode on the ×10…
- GATE 2015 EE Q33 – The primary mmf is least affected by the secondary terminal conditions in a
- GATE 2018 EE Q37 – A 0-1 Ampere moving iron ammeter has an internal resistance of 50 m and inductance of 0.1 mH. A shunt coil is connected to extend its range to 0-10…
- GATE 2019 EE Q33 – The total impedance of the secondary winding, leads, and burden of a 5 A CT is 0.01\ . If the fault current is 20 times the rated primary current of…
- GATE 2024 EE Q23 – The table lists two instrument transformers and their features: Instrument Transformers Features P) Primary is connected in parallel to the grid X)…
- GATE 2025 EE Q28 – Instrument(s) required to synchronize an alternator to the grid is/are