GATE Machining and Machine Tool Operations: Abrasive and non-traditional machining processes – Previous Year Questions
20 GATE previous year questions on Abrasive and non-traditional machining processes (Machining and Machine Tool Operations, Mechanical Engineering) with answers and explanations, from every paper.
20 questions worth 26 marks in all (14 1-mark, 6 2-mark). Asked between 2016 and 2025, so you can see how the topic has been tested over time.
- GATE 2017 ME (ME1) Q32 – Match processes P electrical-discharge machining, Q ultrasonic machining, R chemical machining, S ion-beam machining with characteristics 1 no…
- GATE 2016 ME (ME3) Q32 – In a wire-cut EDM process the necessary conditions that have to be met for making a successful cut are that
- GATE 2016 ME (ME2) Q35 – In an ultrasonic machining (USM) process, the material removal rate (MRR) is plotted as a function of the feed force of the USM tool. With increasing…
- GATE 2016 ME (ME2) Q62 – Electrode surface irregularities in ECM are 3 μm and 6 μm as shown. Pure iron is machined at 12 V DC. Electrolyte conductivity is 0.02 Ω⁻¹mm⁻¹;…
- GATE 2016 ME (ME1) Q33 – The non-traditional machining process that essentially requires vacuum is
- GATE 2018 ME (ME2) Q26 – Material removal in electric discharge machining occurs through .
- GATE 2018 ME (ME2) Q62 – EDM machines a circular hole of diameter 25 mm and depth 20 mm. Material removal rate (mm³/min) is 4104IT-1.23, with I = 300 A and material melting…
- GATE 2018 ME (ME1) Q24 – A grinding ratio of 200 implies .
- GATE 2018 ME (ME1) Q65 – ECM cuts a 10 mm × 30 mm rectangular through-hole in a 12 mm aluminium plate in 2 minutes at 90% efficiency. Aluminium specific removal rate is…
- GATE 2019 ME (ME2) Q35 – In electrical discharge machining, inter-electrode-gap breakdown voltage is 200 V and the RC-circuit capacitance is 50 μF. Find energy released per…
- GATE 2020 ME (ME2) Q19 – Which process uses a tapered horn to amplify and focus mechanical energy for machining glass?
- GATE 2020 ME (ME1) Q22 – The base of a brass bracket needs rough grinding. Which grinding-wheel specification is most suitable?
- GATE 2020 ME (ME1) Q54 – A steel part of surface area 125 cm² is chrome-coated using chromium acid sulphate electrolyte. Current is I=12+0.2t amperes, with t in minutes.…
- GATE 2021 ME (ME2) Q17 – The machining process that involves ablation is
- GATE 2021 ME (ME2) Q49 – A surface grinding operation has been performed on a Cast Iron plate having dimensions 300 mm (length) × 10 mm (width) × 50 mm (height). The grinding…
- GATE 2021 ME (ME1) Q49 – In a grinding operation of a metal, specific energy consumption is 15 J/mm³. If a grinding wheel with a diameter of 200 mm is rotating at 3000 rpm to…
- GATE 2022 ME (ME2) Q28 – Which of these processes involve(s) melting in metallic workpieces?
- GATE 2022 ME (ME1) Q33 – Electrochemical machining operations are performed with tungsten as the tool, and copper and aluminum as two different workpiece materials. Properties…
- GATE 2024 ME Q30 – The grinding wheel used to provide the best surface finish is
- GATE 2025 ME Q24 – Ceramics and glass are machined by