GATE Solid Mechanics: Simple bending theory, flexural and shear stresses, shear centre – Previous Year Questions
10 GATE previous year questions on Simple bending theory, flexural and shear stresses, shear centre (Solid Mechanics, Civil Engineering) with answers and explanations, from every paper.
10 questions worth 14 marks in all (6 1-mark, 4 2-mark). Asked between 2018 and 2026, so you can see how the topic has been tested over time.
- GATE 2018 CE (CE1) Q37 – A 2 m steel cantilever with square section 0.1 m × 0.1 m carries a vertical free-end load producing 5 mm tip displacement. Given E=21011 N/m², maximum…
- GATE 2019 CE (CE2) Q18 – A channel section carries downward vertical shear at its centroid. Which graphical option gives the correct shear-stress distributions in flange and…
- GATE 2019 CE (CE1) Q29 – A rectangular plain-concrete beam of overall depth 500 mm develops equal-magnitude compressive and tensile strains 2.510-4 at opposite extreme fibres.…
- GATE 2019 CE (CE1) Q41 – The built-up wood beam section shown is symmetric about its neutral axis and carries vertical shear 8 kN. Its second moment about that axis is 1.5109\…
- GATE 2020 CE (CE2) Q17 – The weightless cantilever of span L carries tip force P and opposing tip couple PL as shown. Material is uniform and cross-section rectangular of…
- GATE 2022 CE (CE1) Q16 – Consider the cross-section of a beam made up of thin uniform elements having thickness t(t≪a) shown in the figure. The (x, y) coordinates of the…
- GATE 2023 CE (CE1) Q55 – The cross-section of a girder is shown in the figure (not to scale). The section is symmetric about a vertical axis (Y-Y). The moment of inertia of…
- GATE 2024 CE (CE2) Q18 – For a thin-walled section shown in the figure, points P, Q, and R are located on the major bending axis X−X of the section. Point Q is located on the…
- GATE 2025 CE (CE1) Q53 – Consider the beam section shown in the figure, with y indicating the depth of neutral axis (NA). The section is only subjected to an increasing…
- GATE 2026 CE (CE1) Q14 – Black dot shown in the figure qualitatively represents the shear centre of the angle section. The option which represents the position of the shear…