Manufacturing Processes II · Machining · 2 marks · Multiple choice
A 20 mm HSS drill with a point angle of 118 degrees is used for drilling a through hole on a metallic plate of thickness 100 mm with a cutting speed of 333.33 mm/s and feed of 0.22 mm/rev. Assuming that the drill is touching the surface of the plate at the start, the drilling time (in s) is closest to
We are sorry we couldn't write detailed soluition for this, we are working on it!, please consider asking your own AI, its just 2-3 clicks with very minimum effort
More Machining questions
GATE 2019 PI Q59– During a turning operation of a specific work material having shear strength of 220 MPa…
GATE 2026 PI Q33– The modified Taylor law is VTnfm=constant, where speed V is m/s, life T is minutes, feed f…
GATE 2026 PI Q47– The source prints the minimum-energy orthogonal-machining relation =C-/2+/2, with φ shear…
GATE 2026 PI Q51– Which ONE OR MORE work materials are NOT commonly machined with diamond cutting tools?
GATE 2025 PI Q22– An 8 mm through-hole is needed in 30 mm mild-steel plate. Which process best combines high…
GATE 2025 PI Q30– In orthogonal straight turning, feed is 0.1 mm/rev and cut depth is 0.5 mm. ASA side…