Two steel plates are to be connected together by a 5 mm fillet weld of length 150 mm to transfer a design load. If the size of the fillet weld used to connect the same two plates is changed to 6 mm, the weld length (in mm) needed for transferring the same design load is ______ (*in integer*).
The strength of a fillet weld is proportional to its throat area, which is proportional to size times length. So $5 \times 150 = 6 \times L$, which gives $L = 125$ mm.
More Connections: simple, eccentric, beam-column questions
GATE 2025 CE (CE1) Q54– Consider the built-up column made of two I-sections as shown in the figure, with each…
GATE 2025 CE (CE2) Q37– A circular tube of thickness 10 mm and diameter 250 mm is welded to a flat plate using 5…
GATE 2023 CE (CE1) Q31– Consider the fillet-welded lap joint shown in the figure (not to scale). The length of the…
GATE 2023 CE (CE2) Q40– Two plates are connected by fillet welds of size 10 mm and subjected to tension, as shown…
GATE 2022 CE (CE1) Q38– A weld is used for joining an angle section ISA 100 mm × 100 mm × 10 mm to a gusset plate…
GATE 2021 CE (CE1) Q50– A six-bolt bracket carries 60 kN downward at eccentricity 100 mm. Bolts are in two columns…