GATE Structural Analysis: Statically indeterminate structures: force and displacement methods – Previous Year Questions
16 GATE previous year questions on Statically indeterminate structures: force and displacement methods (Structural Analysis, Civil Engineering) with answers and explanations, from every paper.
16 questions worth 27 marks in all (5 1-mark, 11 2-mark). Asked between 2016 and 2025, so you can see how the topic has been tested over time.
- GATE 2017 CE (CE1) Q39 – The planar truss tower shown has statements P: externally determinate; Q: external static indeterminacy 1; R: external static indeterminacy 2; S:…
- GATE 2016 CE (CE2) Q43 – The portal frame shown in the figure is subjected to a uniformly distributed vertical load w (per unit length). The bending moment in the beam at the…
- GATE 2017 CE (CE2) Q24 – If axial and shear deformations in the frame members shown are negligible, the reduction in kinematic indeterminacy is .
- GATE 2019 CE (CE2) Q30 – Find the degree of static indeterminacy of the plane frame shown.
- GATE 2019 CE (CE2) Q47 – The frame shown has an internal hinge G and linear elastic springs at H, with k x=k y=5105\ kN/m and k =3105\ kN\,m/rad. A 30 kN·m moment acts at F.…
- GATE 2020 CE (CE2) Q40 – The shown frame has pin joints I, J, K, L, Q and M. Continuous members IQ and LJ connect through pin N; continuous JM and KQ connect through pin P.…
- GATE 2021 CE (CE2) Q17 – A rigid bar of mass m is supported by three identical massless columns of length L, each fixed against end rotation. Each column has lateral…
- GATE 2021 CE (CE2) Q39 – Frame EFG has fixed base E, vertical column EF=2L and horizontal beam FG=L ending in a roller at G. All members have equal EI; FG carries UDL w.…
- GATE 2021 CE (CE2) Q48 – A fixed-fixed beam is represented by a 10 kg lumped mass at its midpoint. Its flexural stiffness is 42 kN/m. Find natural frequency in Hz (integer).
- GATE 2022 CE (CE2) Q16 – Consider a beam PQ fixed at P, hinged at Q, and subjected to a load F as shown in figure (not drawn to scale). The static and kinematic degrees of…
- GATE 2023 CE (CE1) Q26 – Consider the following three structures: Which of the following statements is/are TRUE?
- GATE 2023 CE (CE1) Q49 – Consider the beam shown in the figure (not to scale), on a hinge support at end A and a roller support at end B. The beam has a constant flexural…
- GATE 2024 CE (CE1) Q39 – The beam shown in the figure is subjected to a uniformly distributed downward load of intensity q between supports A and B. Considering the upward…
- GATE 2024 CE (CE1) Q49 – The plane truss shown in the figure has 13 joints and 22 members. The truss is made of a homogeneous, prismatic, linearly elastic material. All…
- GATE 2025 CE (CE2) Q38 – The figure shows a propped cantilever with uniform flexural rigidity EI (in N.m2) and subjected to a moment M (in N.m). Consider forces and…
- GATE 2025 CE (CE2) Q52 – A steel beam supported by three parallel pin-jointed steel rods is shown in the figure. The moment of inertia of the beam is 8 107 mm4. Take modulus…