GATE Transportation Infrastructure: Geometric design of roadways: cross-section, sight distance, alignments – Previous Year Questions
34 GATE previous year questions on Geometric design of roadways: cross-section, sight distance, alignments (Transportation Infrastructure, Civil Engineering) with answers and explanations, from every paper.
34 questions worth 48 marks in all (20 1-mark, 14 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.
- GATE 2017 CE (CE1) Q26 – Superelevation e is provided on a circular horizontal curve so that a vehicle can stop on the curve without sliding. With design speed v and maximum…
- GATE 2017 CE (CE1) Q44 – A horizontal highway curve has radius 120 m, design speed 60 km/h and lateral-friction coefficient 0.15. Assuming full friction, find the required…
- GATE 2016 CE (CE2) Q64 – A motorist traveling at 100 km/h on a highway needs to take the next exit, which has a speed limit of 50 km/h. The section of the roadway before the…
- GATE 2016 CE (CE1) Q63 – A two-lane one-way road of radius 50 m predominantly carries lorries with wheelbase 5 m, at 60–80 km/h. The mechanical and psychological widening at…
- GATE 2017 CE (CE2) Q32 – For a parabolic vertical curve, the horizontal distance between the point of vertical intersection and point of vertical curvature is 100 m. The curve…
- GATE 2017 CE (CE2) Q35 – A hill road has gradient 6% and horizontal-curve radius 50 m. Grade compensation, to two decimal places, is %.
- GATE 2018 CE (CE2) Q45 – A car follows a truck at 10 m/s on a two-lane, two-way road, 16 m behind it. With a clear opposing gap, the car accelerates at an average 4 m/s²,…
- GATE 2018 CE (CE2) Q64 – A 7.5 m wide two-lane road on plain terrain follows a 510 m radius curve at design speed 100 km/h. Superelevation follows IRC:73-1980 as referred to…
- GATE 2018 CE (CE1) Q44 – At a priority intersection, a single-lane one-way road at 20 km/h crosses an undivided two-lane two-way road at 50 km/h. Perception–reaction time is…
- GATE 2019 CE (CE2) Q33 – A vehicle travels uphill on +4% grade at 20 m/s. Rolling-friction coefficient is 0.46 and g = 10 m/s². Find horizontal braking distance to reduce…
- GATE 2019 CE (CE1) Q21 – The average coefficient of rolling friction of a road is f r and its grade is +G%. If the grade doubles with other parameters unchanged, find the…
- GATE 2019 CE (CE1) Q57 – A parabolic vertical curve joins grades +5% and −3%. Horizontal curve length is 400 m. VPC lies on the +5% grade. Find the height difference between…
- GATE 2020 CE (CE2) Q55 – A two-lane two-way road has design speed 60 km/h, longitudinal friction coefficient 0.36 and driver reaction time 2.5 s. With g = 9.8 m/s², find…
- GATE 2020 CE (CE1) Q30 – An urban median separates opposing traffic streams. As per IRC:86-1983, find desirable minimum median width (m), expressed as an integer.
- GATE 2020 CE (CE1) Q31 – A hill road has 4.5% gradient and a horizontal curve of radius 100 m. The gradient must be eased for combined horizontal and vertical curvature. As…
- GATE 2021 CE (CE2) Q64 – Level-road stopping sight distance is 140 m at design speed 90 km/h. Braking deceleration is 3.5 m/s² (g=9.81). Find perception/reaction time in…
- GATE 2021 CE (CE1) Q24 – The most commonly designed highway vertical curve is
- GATE 2021 CE (CE1) Q25 – A highway designed for 80 km/h has horizontal curve radius 250 m. Assuming design lateral friction develops fully, the required superelevation is
- GATE 2022 CE (CE2) Q62 – A parabolic vertical crest curve connects two road segments with grades +1.0% and −2.0%. If a 200 m stopping sight distance is needed for a driver at…
- GATE 2022 CE (CE1) Q28 – A horizontal curve is to be designed in a region with limited space. Which of the following measure(s) can be used to decrease the radius of…
- GATE 2023 CE (CE2) Q23 – Which of the following is equal to the stopping sight distance?
- GATE 2023 CE (CE2) Q30 – As per the Indian Roads Congress guidelines (IRC 86: 2018), extra widening depends on which of the following parameters?
- GATE 2023 CE (CE1) Q21 – G 1 and G 2 are the slopes of the approach and departure grades of a vertical curve, respectively. Given G 1 < G 2 and G 1 G 2 0 Statement 1: +G 1…
- GATE 2023 CE (CE1) Q35 – For a horizontal curve, the radius of a circular curve is obtained as 300 m with the design speed as 15 m/s. If the allowable jerk is 0.75 m/s3, what…
- GATE 2024 CE (CE2) Q28 – In general, the outer edge is raised above the inner edge in horizontal curves for
- GATE 2024 CE (CE2) Q63 – A vertical summit curve on a freight corridor is formed at the intersection of two gradients, +3.0% and −5.0%. Assume the following: Only large-sized…
- GATE 2024 CE (CE1) Q22 – A car is travelling at a speed of 60 km/hr on a section of a National Highway having a downward gradient of 2%. The driver of the car suddenly…
- GATE 2025 CE (CE2) Q20 – The point where the road alignment changes from a tangent to a curve is known as .
- GATE 2025 CE (CE2) Q64 – On a two-lane highway, a horizontal curve of radius 300 m is provided. The design speed is 80 km/h. If the longest wheelbase of vehicle expected on…
- GATE 2025 CE (CE1) Q35 – Road A and Road B are joined by a circular horizontal curve of radius 200 m as shown in the figure. Road A and Road B are tangential to the curve at…
- GATE 2026 CE (CE2) Q23 – An incident occurred on one side of a median on a four-lane dual carriageway road section. This incident disrupted the traffic movement in one…
- GATE 2026 CE (CE2) Q34 – A downgrade of 1 in 100 meets an upgrade of 1 in 125 on a road. If the rate of change of grade is 0.10 % per 30 m, the length (in m) of the vertical…
- GATE 2026 CE (CE2) Q61 – A vertical curve is formed by a descending gradient of 1 in 40 meeting an ascending gradient of 1 in 50. Consider the following: Stopping Sight…
- GATE 2026 CE (CE1) Q47 – Which of the following statements is/are TRUE in the context of the geometric design of highways?