GATE Mechanics of Materials: Stress, strain and elastic constants – Previous Year Questions
19 GATE previous year questions on Stress, strain and elastic constants (Mechanics of Materials, Mechanical Engineering) with answers and explanations, from every paper.
19 questions worth 30 marks in all (8 1-mark, 11 2-mark). Asked between 2016 and 2025, so you can see how the topic has been tested over time.
- GATE 2017 ME (ME1) Q23 – The Poisson ratio of a perfectly incompressible linear-elastic material is
- GATE 2017 ME (ME1) Q50 – A 100 kg point mass falls from H = 10 mm onto a massless elastic bar of area 100 mm², length 1 m and Young’s modulus 100 GPa, fixed at its base as…
- GATE 2017 ME (ME1) Q52 – A rectangular region in plane strain has undeformed corners P(0,0), Q(4,0), R(4,3), S(0,3). Uniform strains are xx=0.001, yy=0.002, xy=0.003. Find the…
- GATE 2017 ME (ME1) Q54 – A horizontal bar fixed at x=0 is 1 m long with area 100 mm². Its modulus varies as E(x)=100e-x GPa, where x is measured in metres. A 10 kN axial…
- GATE 2016 ME (ME3) Q43 – A square plate of dimension L × L is subjected to a uniform pressure load p = 250 MPa on its edges as shown in the figure. Assume plane stress…
- GATE 2016 ME (ME1) Q42 – A horizontal bar with a constant cross-section is subjected to loading as shown in the figure. The Young’s moduli for the sections AB and BC are 3E…
- GATE 2017 ME (ME2) Q17 – At a point, x= y= z= xz= zx= yz= zy=0 and xy= yx=50 MPa. The maximum normal stress is MPa.
- GATE 2017 ME (ME2) Q20 – A steel bar is held between fixed supports as shown. Its temperature increases by 100°C. Given =1110-6/°C and E = 200 GPa, the induced thermal-stress…
- GATE 2018 ME (ME2) Q43 – A bimetallic cylindrical bar of cross-sectional area 1 m² bonds steel (E = 210 GPa) and aluminium (E = 70 GPa) as shown, with both outer ends clamped.…
- GATE 2019 ME (ME2) Q16 – A linear elastic rectangular thin metal sheet has uniform uniaxial tension 100 MPa along its length. Assume plane stress normal to thickness. With E =…
- GATE 2019 ME (ME2) Q40 – Two concentric cylinders M and N contact at r = b. The interface is frictionless and the composite is loaded by internal pressure P. Let u r,u and rr,…
- GATE 2019 ME (ME1) Q51 – A 100 mm tensile specimen fails at 40 kN and cross-head displacement 15 mm. UTM compliance is constant at 510-8 m/N. Find specimen failure strain (%).
- GATE 2021 ME (ME2) Q35 – A steel cubic block of side 200 mm is subjected to hydrostatic pressure of 250 N/mm². The elastic modulus is 2105 N/mm² and Poisson ratio is 0.3 for…
- GATE 2021 ME (ME1) Q16 – The loading and unloading response of a metal is shown in the figure. The elastic and plastic strains corresponding to 200 MPa stress, respectively,…
- GATE 2021 ME (ME1) Q28 – A prismatic bar PQRST is subjected to axial loads as shown in the figure. The segments having maximum and minimum axial stresses, respectively, are
- GATE 2021 ME (ME1) Q41 – A right solid circular cone standing on its base on a horizontal surface is of height H and base radius R. The cone is made of a material with…
- GATE 2022 ME (ME2) Q51 – A rigid beam AD of length 3a=6 m is hinged at frictionless pin joint A and supported by two strings as shown in the figure. String BC passes over two…
- GATE 2022 ME (ME1) Q26 – Assuming the material considered in each statement is homogeneous, isotropic, linear elastic, and the deformations are in the elastic range, which one…
- GATE 2025 ME Q56 – The state of stress at a point is shown in the figure given below. Under plane stress assumption, the normal strain along the thickness direction (…