The GATE Grind

GATE Solid Mechanics: Simple stress and strain relationships – Previous Year Questions

20 GATE previous year questions on Simple stress and strain relationships (Solid Mechanics, Civil Engineering) with answers and explanations, from every paper.

20 questions worth 33 marks in all (7 1-mark, 13 2-mark). Asked between 2016 and 2026, so you can see how the topic has been tested over time.

  1. GATE 2017 CE (CE1) Q14 (1 mark, Multiple choice) – An elastic bar of length L, uniform area A, thermal-expansion coefficient and Young’s modulus E is fixed at both ends. A temperature increase T causes…
  2. GATE 2017 CE (CE1) Q49 (2 marks, Numerical answer) – A stepped linear-elastic bar carries an axial tensile load of 1 kN. Segment 1 has A 1=100 mm², E 1=2105 MPa and L 1=400 mm. Segment 2 has A 2=60 mm²,…
  3. GATE 2016 CE (CE2) Q41 (2 marks, Multiple choice) – An elastic isotropic body is in a hydrostatic state of stress as shown in the figure. For no change in the volume to occur, what should be its…
  4. GATE 2016 CE (CE2) Q44 (2 marks, Multiple choice) – The hinged structural system shown carries W=100 kN. Member properties L,A,E are indicated. Let L=1 m, A=0.05 m2, and E=30106 N/m2. Which set gives…
  5. GATE 2017 CE (CE2) Q26 (1 mark, Multiple choice) – A 10 mm × 10 mm element is in plane strain. Its exaggerated deformed shape is shown. If engineering shear strain xy=0.001k, then k is .
  6. GATE 2017 CE (CE2) Q53 (2 marks, MTA) – A 2 m long, 8 mm diameter mild-steel rod is loaded in tension. Its load–elongation graph is shown. Yield stress is 250 MPa. Complementary strain…
  7. GATE 2018 CE (CE1) Q39 (2 marks, Multiple choice) – A plate in equilibrium carries uniform tensile edge stresses xx=30 MPa and yy=50 MPa as shown. Given E=21011 N/m², ν = 0.3 and zz=0, strain zz is .
  8. GATE 2019 CE (CE1) Q16 (1 mark, Multiple choice) – An element has biaxial tensile normal strains 0.0030 and 0.0020. Find the normal strain on a plane of maximum shear strain.
  9. GATE 2020 CE (CE2) Q38 (2 marks, Multiple choice) – A prismatic linear elastic bar of length L, area A and Young’s modulus E stores energies U 1,U 2 under axial tensile loads P 1,P 2 respectively. If U…
  10. GATE 2020 CE (CE1) Q51 (2 marks, Numerical answer) – A rigid uniform weightless horizontal bar connects three vertical members P, Q and R, each of axial stiffness 10 kN/mm. P and R rest on a rigid…
  11. GATE 2021 CE (CE1) Q52 (2 marks, Numerical answer) – A square plate of side 1 m deforms with straight edges. Horizontal corner displacements are O:0, P:20 mm, Q:−10 mm, R:0; the figure also gives…
  12. GATE 2022 CE (CE2) Q13 (1 mark, Multiple choice) – For a linear elastic and isotropic material, the correct relationship among Young’s modulus of elasticity (E), Poisson’s ratio (ν ), and shear modulus…
  13. GATE 2022 CE (CE2) Q50 (2 marks, Numerical answer) – Two collinear rods HI and IJ, each length b=2 m, lie between fixed ends. Their axial rigidities are 2AE and AE, with AE=10⁶ N. Both have α=10⁻⁶ °C⁻¹.…
  14. GATE 2023 CE (CE2) Q56 (2 marks, Numerical answer) – A 2D thin plate with modulus of elasticity, E = 1.0 N/m2, and Poisson’s ratio, μ = 0.5, is in plane stress condition. The displacement field in the…
  15. GATE 2023 CE (CE1) Q12 (1 mark, Multiple choice) – A hanger is made of two bars of different sizes. Each bar has a square cross-section. The hanger is loaded by three-point loads in the mid vertical…
  16. GATE 2025 CE (CE1) Q51 (2 marks, Numerical answer) – Consider the rigid bar ABC supported by the pin-jointed links BD and CE and subjected to a load P at the end A, as shown in the figure. The axial…
  17. GATE 2026 CE (CE2) Q16 (1 mark, Multiple choice) – A plane strain problem (in X-Y plane) must satisfy the condition:
  18. GATE 2026 CE (CE2) Q50 (2 marks, Numerical answer) – Linearly elastic, homogeneous, uniform bars BCD and FG shown in the figure have fixed supports at B and G, respectively. For both the bars, axial…
  19. GATE 2026 CE (CE1) Q13 (1 mark, Multiple choice) – A thin-walled spherical gas balloon of radius R and wall thickness t (t R) is subjected to an internal (gauge) pressure p. The maximum tensile and…
  20. GATE 2026 CE (CE1) Q51 (2 marks, Numerical answer) – A homogenous, linearly elastic rod AB is connected to a linearly elastic spring BC in between the fixed supports at A and C, as shown in the figure.…