GATE Networks, Signals and Systems: Two-Port Networks and Wye-Delta Transformation – Previous Year Questions
19 GATE previous year questions on Two-Port Networks and Wye-Delta Transformation (Networks, Signals and Systems, Electronics and Communication Engineering) with answers and explanations, from every paper.
19 questions worth 31 marks in all (7 1-mark, 12 2-mark). Asked between 2014 and 2026, so you can see how the topic has been tested over time.
- GATE 2016 EC (EC3) Q44 – The z-parameter matrix of the shown two-port network is
- GATE 2016 EC (EC2) Q19 – The z-parameter matrix of the shown two-port network is bmatrix2j&j\&3+2jbmatrix\ . If Z b(j)=R b+j, the value of R b in ohms is .
- GATE 2014 EC (EC4) Q43 – Find the impedance matrix Z (Ω) for the two-port network shown.
- GATE 2014 EC (EC3) Q43 – For the Y-network shown, find R₁ (Ω) in the equivalent Δ-network.
- GATE 2014 EC (EC2) Q41 – For the two-port circuit shown, find hybrid parameter h₂₂ (S).
- GATE 2014 EC (EC1) Q34 – A two-port has S=pmatrixs 11&s 12\ 21&s 22pmatrix. Port 2 is shorted. Find the resulting one-port s 11 parameter.
- GATE 2014 EC (EC1) Q40 – A Y-network has arm resistances 10 Ω,10 Ω,11 Ω. Find the lowest resistance (Ω) in its equivalent Δ-network.
- GATE 2016 EC Q19 – Consider a two-port network with the transmission matrix: T = pmatrix A & B \\ C & D pmatrix. If the network is reciprocal, then
- GATE 2018 EC Q35 – The ABCD matrix for a two-port network is defined by: bmatrixV 1\ 1bmatrix=bmatrixA&B\&DbmatrixbmatrixV 2\\-I 2bmatrix The parameter B for the given…
- GATE 2019 EC Q14 – Consider the two-port resistive network shown in the figure. When an excitation of 5 V is applied across Port 1, and Port 2 is shorted, the current…
- GATE 2020 EC Q25 – In the given circuit, the two-port network has the impedance matrix [Z]=bmatrix40&60\\60&120bmatrix. The value of Z L for which maximum power is…
- GATE 2020 EC Q56 – For a 2-port network consisting of an ideal lossless transformer, the parameter S 21 (rounded off to two decimal places) for a reference impedance of…
- GATE 2021 EC Q39 – Consider the two-port network shown in the figure. The admittance parameters, in siemens, are
- GATE 2022 EC Q54 – A linear 2-port network is shown in Fig. (a). An ideal DC voltage source of 10 V is connected across Port 1. A variable resistance R is connected…
- GATE 2023 EC Q33 – For the two port network shown below, the [Y]-parameters is given as [Y]=1100bmatrix2&-1\\-1&43bmatrixS. The value of load impedance Z L, in Ω, for…
- GATE 2023 EC Q46 – The h-parameters of a two port network are shown below. The condition for the maximum small signal voltage gain V outV s is
- GATE 2024 EC Q60 – For the two port network shown below, the value of the Y 21 parameter (in Siemens) is .
- GATE 2025 EC Q40 – The Z-parameter matrix of a two port network relates the port voltages and port currents as follows: bmatrixV 1\ 2bmatrix=ZbmatrixI 1\ 2bmatrix The…
- GATE 2026 EC Q51 – Consider the two-port network as shown in the Figure. Which of the following options provides the correct set of values of A, B, C and D parameters?